To Next Page

To Previous Page

Loading Tab Paper/Postcards/Envelopes

Paper and Other Media

6 Likewise, load the remaining envelopes in the

tray and align the bottom edge of the

envelopes (not the flap side) in the arrow

direction (1). Pinch the left short-side paper

guide and slide it to the desired paper size (2).

Important • The number of sheets that can be loaded

varies depending on the type of the

envelope. For more information, contact our

Customer Support Center or our customer

engineers.

• If envelopes loaded in the tray are 10 sheets

or less, the guides apply more pressure to the

envelopes. It may cause distortion of the

envelopes, and may cause paper jams.

• When loading envelopes, neatly align all

edges. Also, if the envelopes loaded are

tipped, reduce the number of envelopes

loaded.

• Position the guides correctly to match the

envelope size. Otherwise, the envelope may

not be fed properly, resulting in paper jams.

7 Push the tray in gently until it stops.

Note • When removing the Post Card Kit from the

tray, completely loosen the screw before

removing the kit. Place the removed Post

Card Kit back to its original location (1). Then,

tighten the screw for storing (2).

Fuji Xerox docucentre-v c5585 Administrator's Guide

Other manuals for Fuji Xerox docucentre-v c5585