Replacing Consumables
75
Maintenance
3
1 Open the machine front toner cover.
2 Hold the lower part of the toner cartridge of
the color indicated in the message and gently
pull it out.
Note • “Y” is for yellow, “M” is for magenta, “C” is for
cyan, and “K1” and “K2” are for black.
3 Remove the toner cartridge by holding the
handle on the top of the cartridge while gently
pulling it out.
Important • Pull out the toner cartridge gently. Otherwise, toner may spill from the cartridge.
• If you have a used toner cartridge no longer needed, contact your local Fuji Xerox representative for
its disposal.
4 Take out the new toner cartridge of the same
color as the old one from its box, and gently tilt
the cartridge up and down, and then left and
right several times.
Never throw a toner cartridge into an
open flame. Remaining toner in the
cartridge may catch fire and cause burn
injuries or explosion.
If you have a used toner cartridge no
longer needed, contact your local Fuji
Xerox representative for its disposal.