Fuji Xerox docucentre-v c5585 Administrator's Guide

3 Maintenance
88
Maintenance
3
2 Hold the R1 at the position as shown in the
figure.
3 Pull out the unit.
4 Hold the positions indicated by an arrow to
remove the staple cartridge from the unit.
5 Push a new staple cartridge into the unit.
6 Push the removed unit back to the original
position.
7 Close the right cover of the finisher.
Note • A message will be displayed and the machine will not operate if the right cover of the finisher is even
slightly open.

Fuji Xerox docucentre-v c5585 Specifications

General

Brand	Fuji Xerox
Model	docucentre-v c5585
Category	All in One Printer
Language	English