Fuji Xerox DocuPrint CM505 da - Job Assembly; Build Job; (Processing Documents Scanned with Different Settings as One Job); Select [Copy] on the [Services Home] Screen

Job Assembly
121
Copy
3
Job Assembly
This section describes the features you can select on the [Job Assembly] screen. The
following shows the reference section for each feature.
Build Job (Processing Documents Scanned with Different Settings as One Job) ................... 121
Sample Job (Checking the Finished Output of the Copy)........................................................ 125
Combine Original Sets (Adding Originals).............................................................................. 126
Delete Outside/Delete Inside (Deleting Outside or Inside of the Selected Area) .................... 128
Stored Programming (Calling a Stored Program for Build Job).............................................. 130
1 Select [Copy] on the [Services Home]
screen.
2 Select a feature on the [Job Assembly]
screen.
Build Job (Processing Documents Scanned with Different Settings as
One Job)
This feature allows you to apply different copy settings to each document page or each
document stack, and then output the copies as one job.
1 Select [Build Job].
2 Select [On].
3 Select any option.