Fuji Xerox DocuPrint CM505 da - Entering Specific Symbols

Fax/Internet Fax
169
Fax
4
1 Select [Redial List].
2 Select items you want to specify for a
recipient, and select [Close].
Entering Specific Symbols
When specifying a recipient, you can use the following features to enter specific
symbols on the touch screen.
When using the DTMF method, use specific symbols. For information on the DTMF method, refer to
"Remote Folder (Using Remote Folder)" (P.189) and "Broadcast" (P.205).
Feature Button Function Input method
Enter pause - or
<Pause> (-)
Used to enter a pause.
One pause is 3 seconds.
You can enter pauses of
6 seconds, 9 seconds,
etc. with additional
button presses.
Press the <Pause>
button.
(Example)
0-123 ...
0--123 ...
Transmit using a
password
S When a password has
been set, transmission
will start only if the
password matches the
ID number on the remote
terminal.
1. Select [New
Recipients] on the
[Fax/Internet Fax]
screen to display the
keyboard.
2. Select [S].
(Example)
0312345678S12345678
Transmit DTMF
signal
! Used to transmit the
DTMF signal.
1. Select [New
Recipients] on the
[Fax/Internet Fax]
screen to display the
keyboard.
2. Select [More
Characters].
3. Select [!].
(Example)
0311123456!123#