Fuji Xerox DocuPrint CM505 da - Simple Fax; Specifying a Destination Using the Numeric Keypad

Fax
4
4 Fax
160
Simple Fax
You can select [Fax/Internet Fax] or [Simple Fax] on the [Services Home] screen to set
the features for the Fax service.
This section describes the features you can select on the [Simple Fax] screen. [Simple
Fax] allows you to use only basic features to easily send faxes. The following shows
the reference section for each feature.
Specifying a Destination Using the Numeric Keypad ..............................................................160
Speed Dialing (Specifying a Destination Using an Address Number).....................................161
Resolution (Specifying the Scanning Resolution) ....................................................................162
Original Type (Selecting the Document Type).........................................................................162
2 Sided Scanning (Transmitting 2-sided Originals)..................................................................163
1 Select [Simple Fax] on the [Services Home]
screen.
2 Select a feature on the [Simple Fax] screen.
Note • For the Simple Fax service, you can only set [Resolution], [Original Type], and [2 Sided
Scanning]. In addition, when you use this service, [Mixed Size Originals] is set to [On], and
[Transmission Header Text] is set to [Display Header]. If you want to set the other options,
use [Fax/Internet Fax] on the [Services Home] screen to send faxes.
• You cannot switch between [Fax/Internet Fax] and [Simple Fax]. To switch one to another,
you must return to the [Services Home] screen. Once you return to the [Services Home]
screen, the settings you have made in [Fax/Internet Fax] or [Simple Fax] will be cleared.
Specifying a Destination Using the Numeric Keypad
Specify a destination using the numeric keypad.
1 Enter a fax number using the numeric
keypad.
Note • If you have entered an incorrect value,
press the <C (Clear)> button and enter
the correct value.
Numeric keypad