3 Copy
74
Copy
3
Copy
You can select [Copy] or [Simple Copy] on the [Services Home] screen to set the
features for the Copy service.
This section describes the features you can select on the [Copy] screen. The following
shows the reference section for each feature.
Reduce/Enlarge (Making Enlarged/Reduced Copies) ................................................................74
Paper Supply (Selecting the Paper for Copying) ........................................................................77
Output Color (Selecting the Color for Copying) ........................................................................80
2 Sided Copying (Making 2 Sided Copies) ................................................................................85
Copy Output (Specifying Finishing Options) .............................................................................85
Pages per Side (Copying Multiple Pages onto One Sheet).........................................................85
Lighten/Darken (Adjusting the Copy Density)...........................................................................85
You can customize the layout of the features displayed on the [Copy] screen. For more information,
refer to "5 Tools" > "Copy Service Settings" > "Copy Tab - Features Allocation" in the Administrator
Guide.
1 Select [Copy] on the [Services Home]
screen.
2 Select a feature on the [Copy] screen.
Reduce/Enlarge (Making Enlarged/Reduced Copies)
This feature allows you to select a copy ratio to enlarge or reduce the size of copies.
1 Specify a copy ratio. You can use the numeric keypad to specify a value, or [+] and [-]
to specify reduction/enlargement ratios directly.
.
100%
Copies at the same image size as the original document.
To Next Page
Loading...
