5 Scan
286
Scan
5
Encryption (Sending E-mail Encrypted by S/MIME)
When using the E-mail service, you can send e-mail encrypted by S/MIME.
When sending encrypted e-mail, select an e-mail address associated with a certificate
that can be encrypted, from the Address Book.
Note • You can change the default value of [E-mail Encryption] in the System Administration mode.
For information on how to change the default value, refer to "5 Tools" > "Scan Service
Settings" > "Scan Defaults" > "E-mail Encryption" in the Administrator Guide.
Off
Sends e-mail without encryption.
On
Sends e-mail with encryption.
Digital Signature (Sending E-mail with a Digital Signature by S/MIME)
When using the E-mail service, you can send e-mail with a digital signature by
S/MIME.
Digital Signature allows a recipient to confirm whether contents of the e-mail are
changed, or whether the e-mail is sent from the proper sender.
To use this feature, the machine's mail address must be linked to a certificate.
For information on how to link a certificate to the machine’s e-mail address, refer to "12 Encryption and
Digital Signature Settings" > "Configuration of E-mail Encryption/Digital Signature" in the
Administrator Guide.
Off
Sends e-mail without a digital signature.
On
Sends e-mail with a digital signature.
Login Name
You can enter the login name for a destination server.
Note • This feature is displayed only when [Network Scanning] is selected on the [Services Home]
screen.
1 Select [Login Name].
2 Enter the login name using the keyboard displayed on the screen.
For information on how to enter characters, refer to "Entering Text" (P.58).
Password
You can enter the password for a destination server.
Note • This feature is displayed only when [Network Scanning] is selected on the [Services Home]
screen.
1 Select [Password].
2 Enter the password using the keyboard displayed on the screen.
To Next Page
Loading...
