Fuji Xerox DocuPrint CM505 da - Priority Send;Delay Start (Specifying Send Priority;Send Time)

Fax
4
4 Fax
182
fax, or even terminate the transmission. Regardless of whether transmission is successful,
you are charged for the call once the line is connected. For information on line trouble and
call charges, contact your telephone company.
• If you select [Forced 4800 bps], the transmission time may be longer because transmission
is performed at 4800 bps or less to ensure transmission is successful.
1 Select [Starting Rate].
2 Select [Forced 4800 bps], and then select
[Save].
3 Enter the recipient fax number in the same manner as when you make an international
call.
The following is an example:
Important • In some areas, you may need to enter a pause after the telephone company ID number.
Note • For information on the telephone company ID number, contact your telephone company.
Priority Send/Delay Start (Specifying Send Priority/Send Time)
The Priority Send feature allows you to give priority to a fax or polling job over other
jobs.
The Delay Start feature allows you to specify when to send your fax. This feature is
useful for sending faxes when communication charges are low, such as during night
time.
Note • [Priority Send/Delay Start] is not available for Internet Fax.
• [Priority Send] can be set in combination with [Delay Start]. If both features are set, Priority
Send is performed at the time specified in [Delay Start].
1 Select [Priority Send/Delay Start].