Fuji Xerox DocuPrint CM505 da - Operations During Copying; Stopping the Copy Job

3 Copy
66
Copy
3
Operations during Copying
This section describes available operations during copying. The following shows the
reference section for each operation.
Stopping the Copy Job ................................................................................................................66
Changing the Number of Copies.................................................................................................67
Interrupting the Copy Job ...........................................................................................................68
Stopping the Copy Job
To cancel a copy job in progress, use the following procedure.
1 Press either the <Stop> button on the control
panel or [Delete] on the touch screen.
2 Select [Delete]
If [Delete] does not appear on the screen:
1 Press the <Job Status> button.
<Stop> button
<Job Status> button