Printing Basics 111
Loading Print Media
Loading print media properly helps prevent jams and ensures trouble-free printing.
Before loading print media, identify the recommended print side of the print media. This information is
usually on the print media package.
NOTE:
• After loading paper in the feeder, specify the same paper type on the print driver.
This section includes:
•"
Capacity" on page 111
•"Print Media Dimensions" on page 111
•"Loading Print Media in the Multipurpose Feeder" on page 112
•"Loading Print Media in the Priority Sheet Inserter" on page 121
•"Manual Duplex Printing" on page 127
•"Using the Output Tray Extension" on page 132
Capacity
The multipurpose feeder can hold:
• 150 sheets of standard paper
• 16.2 mm (0.64 inches) of thick paper
• One sheet of coated paper
• 16.2 mm (0.64 inches) of post cards
• Five envelopes
• 16.2 mm (0.64 inches) of labels
The priority sheet inserter can hold:
• 10 sheets of standard paper or one sheet of other paper
Print Media Dimensions
The multipurpose feeder accepts print media within the following dimensions:
• Width: 76.2 –215.9 mm (3.00–8.50 inches)
• Length: 127–355.6 mm (5.00–14.00 inches)
The priority sheet inserter accepts print media within the following dimensions:
• Width: 76.2–215.9 mm (3.00–8.50 inches)
• Length: 190.5–355.6 mm (7.50–14.00 inches)
To Next Page
Loading...
