138 Printing Basics
Selecting Options for an Individual Job (Windows)
If you want to use special printing options for a particular job, change the driver settings before
sending the job to the printer. For example, if you want to use Photo print-quality mode for a particular
graphic, select this setting in the driver before printing that job.
1 With the desired document or graphic open in your application, access the Print dialog box.
2 Select your printer and click Preferences to open the print driver.
3 Make selections on the driver tabs.
NOTE:
• In Windows, you can save current printing options with a distinctive name and apply them to other print
jobs. Make selections on the Paper/Output, Image Options, Color Options, Layout/Watermark, or
Advanced tab, and then click Save under Saved Settings on the Paper/Output tab. Click Help for more
information.
4 Click OK to save your selections.
5 Print the job.
See the following table for specific printing options:
Printing Options for Windows
Driver Tab Printing Options
Paper/Output tab • Paper
– Size
– Advanced Paper Selection
• 2-Sided Print
• Output
• Output Color
• Saved Settings
– Save
– Edit
• Envelope/Paper Setup Wizard
• Status
• Defaults
• Default All
Image Options tab • Toner Saver
• Application Reduce/Enlarge
• Image Shift Summary
– Setup
• Defaults
To Next Page
Loading...
