Fuji Xerox DocuPrint CP215 Series User Manual

Using the Operator Panel Menus 159
• Fault Time-out
Purpose:
To specify the time taken by the printer before it cancels jobs that stop abnormally. The print job is
cancelled if it times out.
Values:
• Time-out
Purpose:
To specify the amount of time that the printer waits for data to arrive from the computer. The print job is
cancelled if it times out.
Values:
• Auto Log Print
Purpose:
To automatically print a job history report after every 10 jobs.
Values:
NOTE:
• The job history report can also be printed using the Information Pgs menu.
• mm/ inch
Purpose:
To specify the measurement unit displayed after the numeric value on the operator panel.
Values:
Off Disables the fault time-out.
On 60sec.* Specifies the time taken by the printer before it cancels for jobs
that stop abnormally.
3–300sec.
Off Disables the job time-out.
On 30sec.* Specifies the amount of time that the printer waits for data to
arrive from the computer.
5–300sec.
Off* Does not automatically print a job history report.
On Automatically prints a job history report.
millimeter (mm)* Specifies the default measurement unit.
inch (")

Fuji Xerox DocuPrint CP215 Series Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CP215 Series
Category	Printer
Language	English