Printer Management Software 47
Setup Disk Creation Tool (Windows Only)
The Setup Disk Creation Tool program located in the MakeDisk folder of the Utilities folder on the
Software Pack CD-ROM and the print driver located on the Software Pack CD-ROM are used to
create driver installation packages that contain custom driver settings. A driver installation package
can contain a group of saved print driver settings and other data for things such as:
• Print orientation and multiple-up (document settings)
• Watermarks
If you want to install the print driver with the same settings on multiple computers running on the same
operating system, create a setup disk in a media or in a server on the network. Using the setup disk
that you have created will reduce the amount of work required when installing the print driver.
• Install the print driver for your printer on the computer on which the setup disk is to be created.
• The setup disk can only be used on the operating system on which the disk was created or
computers running the same operating system. Create a separate setup disk for each of the
operating systems.
To Next Page
Loading...
