202 Troubleshooting
Noise
NOTE:
• In this section, the procedures use the Printer Setting Utility.
See also:
•"Printer Setting Utility (Windows Only)" on page 44
Problem Action
The printer makes a strange
noise.
Locate the cause of the problem by removing the toner cartridges.
1 Remove the toner cartridges.
2 Launch the Printer Setting Utility, and click Machine Check on the
Diagnosis tab.
3 Select Main Motor Operation Check from the drop-down list box,
and click the Start button.
4 Click the Play of Sound button to check the motor sound.
See also:
•"Replacing Toner Cartridges" on page 219
If the noise generated from the printer matches with the noise from
the Play of Sound button, perform Dispense Motor Check.
If not, contact the Fuji Xerox local representative office or an
authorized dealer.
Perform Dispense Motor Check.
1 Launch the Printer Setting Utility, and click Machine Check on the
Diagnosis tab.
2 Select Dispense Motor Check(Yellow), Dispense Motor
Check(Magenta), Dispense Motor Check(Cyan), or Dispense
Motor Check(Black) from the drop-down list box, and click the
Start button.
3 Click the Play of Sound button to check the motor sound.
4 Repeat steps 2 and 3 to perform Dispense Motor Check for the rest
of the toner cartridges.
NOTE:
• You can perform Dispense Motor Check for CMYK in any order
you desire.
• Do not check the operation of the dispense motor repeatedly.
If the noise generated from the printer matches with the noise from
the Play of Sound button, reinstall the toner cartridges and perform
Dispense Motor Check again.
If not, contact the Fuji Xerox local representative office or an
authorized dealer.
To Next Page
Loading...
Need help?
General
