52 Printer Connection and Software Installation
Wireless Connection (DocuPrint CP215 w Only)
• For Windows
1 Connect the printer to a wireless network.
Refer to "
Wireless Connection (DocuPrint CP215 w Only)" on page 56.
Perform the following steps as necessary.
If you set up wireless connection using the installer on the Software Pack CD-ROM, the following
steps are not necessary.
2 Set the printer's IP address.
• If DHCP is available on your network, refer to "
Dynamic Methods of Setting the Printer’s IP
Address" on page 64.
• You can also manually set the printer's IP address by using the operator panel. Refer to
"
Assigning an IP Address Manually" on page 65.
3 Install the driver software on the computer from the Software Pack CD-ROM.
Refer to "
Configuring Printer and Installing Software on Windows" on page 69.
• For Mac OS X
1 Connect the printer to a wireless network.
Refer to "
Wireless Connection (DocuPrint CP215 w Only)" on page 56.
2 Set the printer's IP address.
• If DHCP is available on your network, refer to "
Dynamic Methods of Setting the Printer’s IP
Address" on page 64.
• You can also manually set the printer's IP address by using the operator panel. Refer to
"
Assigning an IP Address Manually" on page 65.
3 Install the driver software on the computer from the Software Pack CD-ROM.
Refer to "
Configuring Printer and Installing Software on Mac OS X" on page 99.
To Next Page
Loading...
Need help?
General
