76 Printer Connection and Software Installation
Installing the Print Driver
• USB Connection Setup
Windows Vista or Windows Vista 64-bit Edition
1 Click Start → Control Panel → Hardware and Sound → Printers.
2 Click Add a printer.
3 Click Add a local printer.
4 Select the port connected to your printer, and then click Next.
5 Click Have Disk to display the Install From Disk dialog box.
6 Click Browse, and then select the extracted setup information (.inf) file in "Getting the Driver
File" on page 75.
7 Click Open.
8 Click OK.
9 Select your printer name and click Next.
10 To change the printer name, enter the printer name in the Printer name box.
To use this printer as the default printer, select the Set as the default printer check box
displayed under the Printer name.
11 Click Next.
Installation starts.
If the User Account Control dialog box appears, click Continue.
NOTE:
• If you are an administrator on the computer, click Continue; otherwise, contact your administrator to
continue the desired action.
12 Upon completion of the driver installation, click Print a test page to print a test page.
13 Click Finish.
To Next Page
Loading...
