Using the Operator Panel Menus 167
Panel Lock Function
When your printer is configured as a network printer available to a number of users, the access to the
operator panel menus can be limited by enabling the Panel Lock. This prevents unauthorized users
from changing the settings made by the administrator. However, you can select settings for individual
print jobs using the print driver.
This section includes:
•"
Enabling the Panel Lock" on page 167
•"Changing the Panel Lock Password" on page 168
•"Disabling the Panel Lock" on page 168
Enabling the Panel Lock
1 Press the (Menu) button.
2 Select Admin Menu, and then press the button.
3 Select Secure Settings, and then press the button.
4 Select Panel Lock, and then press the button.
5 Select Panel Lock Set, and then press the button.
6 Select Enable, and then press the button.
7 Enter a new password, and then press the button.
8 Re-enter the password to confirm the password that you entered, and then press the button.
NOTE:
• If you have forgotten your password, turn off the printer. Then, while holding the (Menu) button, turn on the
printer. Continue to hold the (Menu) button until the display indicates to enter a new password. Release
the (Menu) button and enter a new password, and then press the
button. Re-enter the password to
confirm, and then press the
button. The display will briefly indicate the password has been changed.
To Next Page
Loading...
Need help?
General
