Printing Basics 123
8 Select the paper type from the print driver if the loaded print media is not standard plain paper. If
a user-specified print media is loaded in the priority sheet inserter, you must specify the paper
size setting by using the print driver.
NOTE:
• For more information about setting the paper size and type on the print driver, refer to the Help provided for
the print driver.
Loading Envelope in the Priority Sheet Inserter
NOTE:
• Be sure to fully insert the envelope until it stops. Otherwise, print media that is loaded on the multipurpose
feeder will be fed.
• When you print on envelopes, be sure to specify the envelope setting on the print driver. If not specified, the
print image will be rotated 180 degrees.
• When Loading # 10, DL, Monarch, Yougata 4, or Younaga 3
Load the envelope with the side to be printed on facing up, the flap side facing down, and the flap
turned to the right.
To Next Page
Loading...
Need help?
General
