Troubleshooting 207
091-402 The service life of your printer is coming to an end and the printer will soon stop
running.
If you want to keep using the printer, change the Machine Life setting to Continue
Print. However, continuous use of the printer will degrade the print quality.
See also:
•"Machine Life" on page 165
091-441 The printer has exceeded its service life or the settings have been changed to continue
using it. The quality of printouts will degrade if the printer continues to be used.
See also:
•"Machine Life" on page 165
092-651 Turn off the printer, and then on. If this does not solve the problem, contact the Fuji
Xerox local representative office or an authorized dealer.
See also:
•"Online Services" on page 239
092-661
092-310 Clean the CTD sensor.
See also:
•"Cleaning the Color Toner Density (CTD) Sensor" on page 218
092-910
093-423 Replace the specified toner cartridge soon.
See also:
•"Replacing Toner Cartridges" on page 219
093-424
093-425
093-426
093-919 Re-install the specified toner cartridge, turn off the printer, and then on.
See also:
•"Replacing Toner Cartridges" on page 219
093-920
093-921
093-922
093-930 Remove the specified toner cartridge and install a new one. If you do not replace the
toner cartridge, print quality problems may occur.
See also:
•"Replacing Toner Cartridges" on page 219
093-931
093-932
093-933
093-950 Check the specified toner cartridge if there is any malfunction. Re-install the specified
toner cartridge.
See also:
•"Replacing Toner Cartridges" on page 219
093-951
093-952
093-925
093-960 Re-install the specified toner cartridge with the supported one.
See also:
•"Replacing Toner Cartridges" on page 219
093-961
093-962
093-926
093-970 Re-install the specified toner cartridge.
See also:
•"Replacing Toner Cartridges" on page 219
093-971
093-972
093-973
Error-Code What You Can Do
To Next Page
Loading...
Need help?
General
