188
Home > Copy > Enlarge or Reduce Copied Images
Enlarge or Reduce Copied Images
Select an enlargement or reduction ratio to resize your copied data.
1.
Load your document.
2.
Press [Copy].
3.
Enter the number of copies.
4.
Press [Options] > [Enlarge/Reduce].
5.
Swipe up or down or press
▲
or
▼
to display the available options, and then press the option you want.
6.
Do one of the following:
• If you select [Enlarge] or [Reduce], press the enlargement or reduction ratio you want to use.
• If you select [Custom(25-400%)], press (backspace) to erase the displayed percentage, or press
◄
to move the cursor, and then enter an enlargement or reduction ratio from [25] to [400].
Press [OK].
• If you selected [100%] or [Auto], go to the next step.
• [Auto] sets the machine to calculate the reduction ratio that best fits the size of paper.
• [Auto] is only available when using the ADF.
7.
When finished, press [OK].
8.
Press [Start].
• Copy
To Next Page
Loading...
