19
Home > Introduction to Your Fuji Xerox Machine > How to Navigate the Touchscreen LCD
How to Navigate the Touchscreen LCD
Press your finger on the LCD to operate it. To display and access all the options, swipe left, right, up, down or
press
◄
►
or
▲
▼
on the LCD to scroll through them.
The following steps explain how to change a machine setting. In this example, the LCD Backlight setting is
changed from [Light] to [Med].
DO NOT press the LCD with a sharp object, such as a pen or stylus. It may damage the machine.
DO NOT touch the LCD immediately after plugging in the power cord or turning on the machine. Doing this may
cause an error.
1.
Press [Settings].
2.
Press [All Settings].
3.
Swipe up or down or press
▲
or
▼
to display the [General Setup] option, and then press [General
Setup].
4.
Swipe up or down or press
▲
or
▼
to display the [LCD Settings] option, and then press [LCD Settings].
5.
Press [Backlight].
To Next Page
Loading...
Need help?
General
