Fuji Xerox DocuPrint M385 z - Page 220

220
Home > Fax > Receive a Fax > Receive Mode Settings > Set Fax Detect
Set Fax Detect
1. Press [Settings] > [All Settings] > [Fax] > [Setup Receive] > [Fax Detect].
2. Press [On] or [Off].
3. Press .
Related Information
• Receive Mode Settings
Related Topics
• Operation from External and Extension Telephones
If Fax Detect is On: The machine receives a fax call automatically, even if you answer the call. When you
see [Receiving] on the LCD or when you hear “chirps” through the handset you are using, just replace
the handset. Your machine will do the rest.
If Fax Detect is Off: If you are at the machine and answer a fax call by lifting the handset, press the buttons
in the following table to receive the fax. If you answered at an extension or external telephone, press *51
(*91 for New Zealand).
• If this feature is set to [On], but your machine does not connect a fax call when you lift an extension or
external telephone handset, press the remote activation code *51 (*91 for New Zealand).
• If you send faxes from a computer on the same telephone line and the machine intercepts them, set
Fax Detect to [Off].
Applicable Models To receive the fax
DocuPrint M385 z/DocuPrint M375 z/DocuPrint M375 df Fax Start and then Receive