240
Home > Fax > Voice Operations and Fax Numbers > Voice Operations > Send Tone Signals
Send Tone Signals
If you have a Pulse dialling service, but must send Tone signals (for example, for telephone banking), follow these
steps. If you have a Touch Tone service, you will not need this feature to send tone signals. (This feature is not
available in New Zealand.)
1.
Press [Fax].
2.
Press [Hook].
3.
Press # on the machine's LCD.
Any digits dialled after this will send tone signals.
When you are finished with the call, the machine will return to the Pulse dialling service.
• Voice Operations
To Next Page
Loading...
