261
Home > Fax > Telephone Services and External Devices > External TAD (Telephone Answering Device) >
Record an Outgoing Message (OGM) on the External TAD
Record an Outgoing Message (OGM) on the External TAD
1.
Record 5 seconds of silence at the beginning of your message. This allows your machine time to listen for fax
tones.
2.
Limit your speaking to 20 seconds.
3.
End your 20-second message by giving your Remote Activation Code for people sending manual faxes. For
example: “After the beep, leave a message or press *51 and Start to send a fax.”
We recommend beginning your OGM with an initial 5 second silence because the machine cannot hear fax
tones over a loud voice. You may try leaving out this pause, but if your machine has trouble receiving faxes,
then you should re-record the OGM to include it.
• External TAD (Telephone Answering Device)
To Next Page
Loading...
Need help?
General
