266
Home > Fax > Telephone Services and External Devices > External and Extension Telephones > Use the
Remote Codes > Change the Remote Codes
Change the Remote Codes
The preset Remote Activation Code is *51 (*91 for New Zealand). The preset Remote Deactivation Code is #51
(#91 for New Zealand). If you are always disconnected when accessing your External TAD remotely, try changing
the three-digit remote codes using the numbers 0-9, *, #.
1.
Press [Settings] > [All Settings] > [Fax] > [Setup Receive] > [Remote Codes].
2.
Do one of the following:
• To change the Remote Activation Code, press [Act.Code]. Enter the new code, and then press [OK].
• To change the Remote Deactivation Code, press [Deact.Code]. Enter the new code, and then press
[OK].
• If you do not want to change the Codes, go to the next step.
• To turn off (or turn on) the Remote Codes, press [Remote Codes], and then press [Off] (or [On]).
3.
Press .
• Use the Remote Codes
To Next Page
Loading...
Need help?
General
