315
• Windows
®
10
Click > Windows System > Control Panel. In the Hardware and Sound group, click Add a device.
• To use a Windows
®
7, Windows
®
8, or Windows
®
10 computer as a Registrar, you must register it to your
network in advance. For more information, see the instructions supplied with your wireless LAN access
point/router.
• If you use Windows
®
7, Windows
®
8, or Windows
®
10 as a Registrar, you can install the printer driver
after the wireless configuration by following the on-screen instructions. To install the full driver and
software package, use the Fuji Xerox installation disc.
7.
Select your machine and click Next.
8.
Type the PIN displayed on the machine's LCD, and then click Next.
9.
Select your network, and then click Next.
10.
Click Close.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install drivers and software necessary for operating your
device, insert the Fuji Xerox installation disc to your computer or go to the download page for your model on the
Fuji Xerox website at http://www.fujixerox.com
.
• Additional Methods of Configuring Your Fuji Xerox Machine for a Wireless Network
Related Topics
• Wireless LAN Report Error Codes
To Next Page
Loading...
Need help?
General
