328
Home > Network > Additional Methods of Configuring Your Fuji Xerox Machine for a Wireless Network > Use
Wi-Fi Direct
®
> Print or Scan from Your Mobile Device Using Wi-Fi Direct
Print or Scan from Your Mobile Device Using Wi-Fi Direct
Wi-Fi Direct is one of the wireless configuration methods developed by the Wi-Fi Alliance
®
. It allows you to
configure a secured wireless network between your Fuji Xerox machine and a mobile device, such as an
Android™ device, Windows Phone
®
device, iPhone, iPod touch, or iPad, without using an access point. Wi-Fi
Direct supports wireless network configuration using the one-push or PIN Method of Wi-Fi Protected Setup™
(WPS). You can also configure a wireless network by manually setting an SSID and password. Your Fuji Xerox
machine's Wi-Fi Direct feature supports WPA2™ security with AES encryption.
1. Mobile device
2. Your Fuji Xerox machine
• Although the Fuji Xerox machine can be used in both a wired and wireless network, only one connection
method can be used at a time. However, a wireless network connection and Wi-Fi Direct connection, or a
wired network connection (supported models only) and Wi-Fi Direct connection can be used at the same
time.
• The Wi-Fi Direct-supported device can become a Group Owner (G/O). When configuring the Wi-Fi Direct
network, the G/O serves as an access point.
• Ad-hoc mode and Wi-Fi Direct cannot be used at the same time. Disable one function to enable the other.
If you want to use Wi-Fi Direct while you are using Ad-hoc mode, set Network I/F to Wired LAN or disable
Ad-hoc mode and connect your Fuji Xerox machine to the access point.
• Use Wi-Fi Direct
®
Related Models: DocuPrint M385 z/DocuPrint M375 z