333
Home > Network > Additional Methods of Configuring Your Fuji Xerox Machine for a Wireless Network > Use
Wi-Fi Direct
®
> Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Using the One-
Push Method of Wi-Fi Protected Setup
™
(WPS)
Configure Your Wi-Fi Direct Network Using the One-Push Method of Wi-
Fi Protected Setup
™
(WPS)
If your mobile device supports WPS (PBC; Push Button Configuration), follow these steps to configure a Wi-Fi
Direct network.
When the machine receives the Wi-Fi Direct request from your mobile device, the message [Wi-Fi
Direct connection request received. Press [OK] to connect.] will appear on the LCD.
Press [OK] to connect.
1.
Press [] [Settings] > [All Settings] > [Network] > [Wi-Fi Direct] > [Group Owner].
2.
Press [On].
3.
Swipe up or down or press
▲
or
▼
to select the [Push Button] option. Press [Push Button].
4.
Activate your mobile device's WPS one-push configuration method (see your mobile device's user's guide for
instructions) when [Activate Wi-Fi Direct on other device. Then Press [OK].] appears on
the machine's LCD. Press [OK] on your Fuji Xerox machine.
This will start the Wi-Fi Direct setup. To cancel, press .
5.
If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed
the Wi-Fi Direct network setup.
• Configure Your Wi-Fi Direct Network
Related Topics
• Wi-Fi Direct Network Configuration Overview
Related Models: DocuPrint M385 z/DocuPrint M375 z
To Next Page
Loading...
Need help?
General
