373
Home > Network > Advanced Network Features > Synchronize Time with the SNTP Server Using Web
Based Management > Configure Date and Time Using Web Based Management
Configure Date and Time Using Web Based Management
Configure date and time to synchronize the time used by the machine with the SNTP time server.
1.
Start your web browser.
2.
Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.0.2.1
3.
Type a password, and then click . The default password is "x-admin". To ensure security, it is important you
change the password.
4.
Click the Administrator tab.
5.
Click Date&Time in the left navigation bar.
Select the time difference between your location and UTC from the Time Zone drop-down list. For example,
the time zone for Eastern Time in the USA and Canada is UTC-05:00.
6.
Verify the Time Zone settings.
7.
Select the Synchronize with SNTP server check box.
8.
Click Submit.
• Synchronize Time with the SNTP Server Using Web Based Management
This feature is not available in some countries.
To Next Page
Loading...
Need help?
General
