402
Home > Security > Network Security Features > Use LDAP Authentication > Log On to Change the Machine
Settings Using the Machine's Control Panel (LDAP Authentication)
Log On to Change the Machine Settings Using the Machine's Control
Panel (LDAP Authentication)
1.
On the machine's control panel, use the touchscreen to enter your User ID and Password.
2.
Press [OK].
3.
When authentication is successful, the machine's control panel will be unlocked.
• Use LDAP Authentication
When LDAP Authentication is enabled, the machine's control panel will be locked until you enter your User ID
and password on the machine's control panel.
To Next Page
Loading...
Need help?
General
