427
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/TLS >
Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Certificate
from a Certificate Authority (CA) > Import and Export the Certificate and Private Key > Export the Certificate
and Private Key
Export the Certificate and Private Key
1.
Start your web browser.
2.
Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.0.2.1
• If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such
as "SharedPrinter" instead of the IP address.
-For example:
http://SharedPrinter
If you enable a NetBIOS name, you can also use the node name.
-For example:
http://fxnxxxxxxxxxxxx
The NetBIOS name can be found in the Network Configuration Report.
• For Mac, access Web Based Management by clicking the machine's icon on the Status Monitor screen.
3.
Type a password, and then click . The default password is "x-admin". To ensure security, it is important you
change the password.
4.
Click the Network tab.
5.
Click the Security tab.
6.
Click Certificate.
7.
Click Export shown with Certificate List.
8.
Enter the password if you want to encrypt the file.
If a blank password is used, the output is not encrypted.
9.
Enter the password again for confirmation, and then click Submit.
10.
Click Save.
11.
Specify the location where you want to save the file.
The certificate and private key are exported to your computer.
You can also import the certificate to your computer.
• Import and Export the Certificate and Private Key
To Next Page
Loading...
Need help?
General
