589
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Set Tone
or Pulse Dialling Mode
Set Tone or Pulse Dialling Mode
Your Fuji Xerox machine is set for a Tone dialling service. If you have a Pulse dialling (rotary) service, you must
change the dialling mode.
This feature is not available in some countries.
1.
Press [Settings] > [All Settings] > [Initial Setup] > [Tone/Pulse].
2.
Press [Tone] or [Pulse].
3.
Press .
• General Settings
To Next Page
Loading...
