591
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Add a
Prefix to Every Fax Number
Add a Prefix to Every Fax Number
The Dial Prefix setting will automatically dial a predefined number before every fax number you dial. For example:
If your telephone system requires a 9 to dial an outside number, use this setting to automatically dial 9 for every
fax you send.
• Use the numbers and symbols from 0 to 9, #, and *. (You cannot use ! with any other numbers or
symbols.)
• If your telephone system requires a time break recall (hookflash), press ! on the LCD.
1.
Press [Settings] > [All Settings] > [Initial Setup] > [Dial Prefix].
2.
Press [On] or [Off].
3.
Press [Dial Prefix].
4.
Enter a prefix number (up to five digits) using the LCD, and then press [OK].
To change the prefix number, press
◄
or
►
to position the cursor under the digit to be deleted and press the
Back Space button . Then press the correct digit.
Repeat until the prefix number is correct, and then press [OK].
5.
Press .
• General Settings
Option Description
On To activate the prefix number setting, select On.
If you selected On, go to the next step to set a prefix number.
Off To deactivate the prefix number setting, select Off.
If you selected Off, press to exit.
To Next Page
Loading...
