630
Home > Machine Settings > Change Machine Settings from Your Computer > Change the Machine Settings
Using Remote Setup > Remote Setup (Windows
®
) > Set Up the Fuji Xerox Machine Using ControlCenter4
(Windows
®
)
Set Up the Fuji Xerox Machine Using ControlCenter4 (Windows
®
)
If Secure Function Lock is set to On, you cannot use Remote Setup.
1.
Click the (ControlCenter4) icon in the task tray, and then click Open.
2.
Click the Device Settings tab.
3.
Click the Remote Setup button.
4.
Configure the settings as needed.
Export
Click to save the current configuration settings to a file.
Click Export to save your address book or all settings for your machine.
Import
Click to import a file and read its settings.
Print
Click to print the selected items on the machine. You cannot print the data until it is uploaded to the
machine. Click Apply to upload the new data to the machine, and then click Print.
To Next Page
Loading...
