Fuji Xerox DocuPrint P365 d - Auditron Mode; Maintenance Mode

Using the Operator Panel Menus 125
•Auditron Mode
Purpose:
To specify whether to limit the functions that can be used per user by Auditron authentication.
Values:
•No Acct User Prt
Purpose:
To specify whether to permit the printing of data without authentication information.
Values:
•LetterH Dup Mode
Purpose:
To specify whether to print on both sides when you use letterhead.
Values:
•Low Toner Msg
Purpose:
To specify whether to show the alert message when the toner is low.
Values:
•FW Download Mode
Purpose:
To specify whether to update the printer by downloading firmware.
Values:
Maintenance Mode
Use the Maintenance Mode menu to initialize the NV (non-volatile) memory, configure the plain paper quality
adjustment settings, and configure the security settings.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
Off* Does not limit functions by Auditron authentication.
On Limits functions by Auditron authentication.
Off* Does not permit non-account user to print the data.
On Permits non-account user to print the data.
Disable
*
Does not print on both sides of letterhead.
Enable Prints on both sides of letterhead.
Off Does not show the alert message when the toner is low.
On
*
Shows the alert message when the toner is low.
Disable Disables updating the printer.
Enable
*
Enables updating the printer.