Fuji Xerox DocuPrint P365 d - Adjust Papertype

126 Using the Operator Panel Menus
•F/W Version
Purpose:
To confirm the current F/W version.
•Adjust PaperType
Purpose:
To specify paper density settings.
Values:
•Adjust TransUnit
Purpose:
To specify the transfer unit voltage adjustment for each paper type.
The default settings may not give the best output on all paper types. If you see mottles on the print output, try to increase
the voltage. If you see white spots on the print output, try to decrease the voltage.
NOTE:
• The print quality changes depending on the setting values you select for this item.
Values:
Plain Lightweight
Heavyweight
*
Plain 0
*
-5 to +10
Plain Thick 0
*
-5 to +10
Light Card 0
*
-5 to +10
Heavy Card 0
*
-5 to +10
Envelope 0
*
-5 to +10
Labels 0
*
-5 to +10