132 Using the Operator Panel Menus
NOTE:
• When MPT mode is set to DriverSpecified, Paper Size, Paper Type, and Display Screen are not available.
• For more information on supported paper sizes, see also "Usable Print Media" on page 74.
Tray1
Purpose:
To specify the paper loaded in the standard 250 sheet tray.
Values:
Display Screen Off Does not display a popup menu that prompts to set Paper Type and
Paper Size when paper is loaded in the bypass tray.
On
*
Displays a popup menu that prompts to set Paper Type and Paper Size
when paper is loaded in the bypass tray.
Paper Size
mm series
A4 - 210x297
*1
A5 - 148x210
B5 - 182x257
Letter - 8.5x11
Folio - 8.5x13
Legal - 8.5x14
Executive
New Custom Size Portrait(Y) 297 mm
*
Specifies the length of the
custom size paper.
210 - 355 mm
Landscape(X) 210 mm
*
Specifies the width of the
custom size paper.
140 - 215 mm
inch series Letter - 8.5x11
Folio - 8.5x13
Legal - 8.5x14
Executive
A4 - 210x297
*1
A5 - 148x210
B5 - 182x257
New Custom Size Portrait (Y) 11.7"
*
Specifies the length of the
custom size paper.
8.3-14.0"
Landscape (X) 8.3"* Specifies the width of the
custom size paper.
5.8-8.5"
Paper Type Plain
*
Plain Thick
Light Card
Heavy Card
Labels
Letterhead
Hole Punched
Colored
Other Type
Display Screen Off Does not display a popup menu that prompts to set Paper Type and
Paper Size when paper is loaded in the standard 250 sheet tray.
On
*
Displays a popup menu that prompts to set Paper Type and Paper Size
when paper is loaded in the standard 250 sheet tray.
To Next Page
Loading...
