134 Using the Operator Panel Menus
Tray2
NOTE:
• Tray2 is available only when the optional 550 sheet feeder is installed.
Purpose:
To specify the paper loaded in the optional 550 sheet feeder.
*1
The default for Paper Size varies depending on region-specific factory default.
NOTE:
• For more information on supported paper sizes, see also "Usable Print Media" on page 74.
Paper Size
mm series
A4 - 210x297
*1
A5 - 148x210
B5 - 182x257
Letter - 8.5x11
Folio-8.5x13
Legal - 8.5x14
Executive
New Custom Size Portrait(Y) 297 mm* Specifies the length of the
custom size paper.
210-355 mm
Landscape(X) 210 mm* Specifies the width of the
custom size paper.
140-215 mm
inch series Letter - 8.5x11
*1
Folio - 8.5x13
Legal - 8.5x14
Executive
A4 - 210x297
A5 - 148x210
B5 - 182x257
New Custom Size Portrait(Y) 11.7"* Specifies the length of the
custom size paper.
8.3-14.0"
Landscape(X) 8.3"* Specifies the width of the
custom size paper.
5.5-8.5"
Paper Type Plain
*
Plain Thick
Light Card
Heavy Card
Labels
Letterhead
Hole Punched
Colored
Other Type
Display Screen Off Does not display a popup menu that prompts to set
Paper Type and Paper Size when paper is loaded in the
optional 550 sheet feeder.
On* Displays a popup menu that prompts to set Paper
Type and Paper Size when paper is loaded in the
optional 550 sheet feeder.
To Next Page
Loading...
