16 Specifications
Paper Size Bypass tray:
A4, B5, A5, Legal (8.5 14"), Folio (8.5 13"), Letter (8.5 11"), Executive, C5, Com-10,
DL, Monarch, Custom (Width: 76.2 – 215.9 mm, Length: 127 – 355.6 mm)
Standard 250 sheet tray:
A4, B5, A5, Legal (8.5 14"), Folio (8.5 13"), Letter (8.5 11"), Executive, Custom
(Width: 139.7 – 215.9 mm, Length: 210 – 355.6 mm)
Optional 550 sheet feeder:
A4, B5, A5, Legal (8.5 14"), Folio (8.5 13"), Letter (8.5 11"), Executive, Custom
(Width: 139.7 – 215.9 mm, Length: 210 – 355.6 mm)
Paper Type Plain (60 – 80 gsm), Plain Thick (81 – 105 gsm), Light Card (106 – 163 gsm), Heavy Card
(164 – 216 gsm), Envelope, Labels, Letterhead, Hole Punched, Colored, Other Type
IMPORTANT:
• For 2 sided printing, use the 60 – 163 gsm plain paper.
• Use only the recommended paper. Using paper other than that recommended for the
printer can cause printing problems. Do not use special ink jet paper. For information
about the kind of the recommended paper, contact your local Fuji Xerox
representative.
• Note that poor printing quality due to paper-related printing problems can occur
when using the printer in an environment that is dry, cold, or very humid.
• Printing over the printed side or on the reverse side of paper that already has been
printed on can result in poor print quality.
• When printing on envelopes, use envelopes that do not have adhesive applied.
• The type of paper being used and environmental conditions can affect printing
quality. Because of this, it is recommended that you test print and confirm proper
print quality before using the printer.
Paper Tray Capacity Standard:
250 sheets (Standard 250 sheet tray) + 50 sheets (Bypass tray)
Optional:
550 sheets (Optional 550 sheet feeder)
Maximum paper capacity:
850 sheets (Standard + Optional 550 sheet feeder)
IMPORTANT:
• For special paper (cardstock, envelope, label), there is a limitation of the following.
•From the bottom of the tray, up to 10 mm height (Standard 250 sheet tray)
•From the bottom of the tray, up to 5.5 mm height (Bypass tray)
•From the bottom of the tray, up to 20 mm height (Optional 550 sheet feeder)
• When using Fuji Xerox P paper (64 gsm)
Output Tray Capacity Approximately 150 sheets (A4 ) (face down)
IMPORTANT:
• When using Fuji Xerox P paper (64 gsm)
2-sided Printing Feature Standard
Memory Standard: 256 MB (Onboard)
Optional: 512 MB
Maximum memory capacity: 768 MB (Standard + optional 512MB memory)
IMPORTANT:
• Depending on the function, the optional 512MB memory is required.
• The above memory capacity does not guarantee print quality depending on the type
and content of print data.
HDD —
Standard Fonts Built-in fonts
PCL 5 and PCL 6 fonts: 81 fonts and 36 symbol sets
PostScript
®
3
™
: 136 fonts
PDF Font: 14 fonts
Items Description
To Next Page
Loading...
Need help?
General
