Printing Basics 79
2
Hold the tray with both hands, and remove it from the printer.
3
Adjust the paper guides.
NOTE:
• When loading Legal size or user-specified print media, slide the extendable part of the tray while pinching the lever.
4
Before loading the print media, flex the sheets and fan them. Straighten the edges of the stack on a level surface.
5
Load the print media into the tray with the recommended print side facing up.
NOTE:
• Do not exceed the maximum fill line in the tray. Overfilling the tray may cause paper jams.
6
Align the width guides and length guide against the edges of the print media.
To Next Page
Loading...
Need help?
General
