Printing Basics 83
7
Insert the bypass tray into the printer.
8
On the operator panel, select the appropriate paper size, and then press the button.
NOTE:
• If you use the driver setting, select Use Driver Settings.
9
Select the appropriate paper type, and then press the button.
Printing on Envelopes - Envelope Mode
To print on envelopes with better print quality, set the printer to the envelope mode.
NOTE:
• Print jobs can be done on envelopes even when the printer is not set to the envelope mode. To prevent envelopes from wrinkling and
get the better print results, set the printer to the envelope mode.
• Be sure to cancel the envelope mode when printing on print media other than envelopes. Otherwise, it may result in poor print quality
or printer malfunction.
•To Set the Printer to the Envelope Mode
1
Pull the rear door handle to open the rear door.
2
Lift the levers on both sides of the fusing unit.
To Next Page
Loading...
Need help?
General
