Preparing for use
A26361-K675-Z120-1-7619, edition 3 9
Proceed as follows to prepare the PC for the vertical operating position:
► If you have already operated the PC, switch it off and disconnect all cables from the casing.
► Assemble the base feet in the direction of
the arrow.
1
1
► Place the casing on the right side so that
the On/Off switch is at the bottom.
► Fit the base feet with the screws
included (1) (one screw per foot and
hole).
► Place the unit on the base feet and reconnect any cables disconnected previously.
To Next Page
Loading...
