Fujitsu Siemens Computers SCENIC E User Manual

Preparing for use
A26361-K675-Z120-1-7619, edition 3 11
Connecting the mouse
Depending on the equipment level selected, your PC will be supplied with a PS/2 mouse or a USB
mouse.
Connecting a PS/2 mouse
► Connect the PS/2 mouse to the PS/2 mouse port
of the PC.
Connecting USB mouse
► Connect the USB mouse to a USB port
of the PC.
i
If you do not attach a mouse at the PS/2 mouse port, you can disable the mouse
controller in the BIOS Setup in order to free the IRQ12 for a different application.
Connecting a keyboard
Depending on the equipment level selected, your PC will be supplied with a standard keyboard or a
USB keyboard.
Connecting standard keyboard
Use the supplied keyboard cable only.
► Plug the other end of the keyboard cable (square plug) into the socket on the underside of the
keyboard.
► Plug the round plug of the keyboard cable into the keyboard port
of the PC.
Connecting USB keyboard
Use the supplied keyboard cable only.
► Plug the other end of the keyboard cable (square plug) into the socket on the underside of the
keyboard.
► Insert the rectangular USB plug of the keyboard cable into a USB port
of the PC.

Fujitsu Siemens Computers SCENIC E Specifications

General

Brand	Fujitsu Siemens Computers
Model	SCENIC E
Category	Desktop
Language	English