Fujitsu Siemens Computers SCENIC E - Operating Manual

76 pages

Save Page as PDF

To Next Page

To Previous Page

SCENIC E

Operating Manual

Introduction

Important notes

Preparing for use

Operation

Troubleshooting and tips

System expansions

Technical data

Index

January 2005 edition

Main Page

Operating Manual5
Table of Contents7
Your SCENIC E9
Notational Conventions10
Important Notes11
Safety Notes11
- Energy Saving, Disposal and Recycling11
- A26361-K675-Z120-1-7619, Edition11
CE Marking12
FCC Class B Compliance Statement13
Transporting the PC13
Cleaning the PC13
Preparing for Use15
Unpacking and Checking the Delivery15
Steps for Initial Setup15
Setting up the PC16
Connect the Monitor, Mouse and Keyboard18
- Connecting the Monitor18
- Connecting the Mouse19
- Connecting a Keyboard19
Connecting the PC to the Mains Voltage20
Initial Switch-On: Software will be Installed21
- Switching on Monitor and PC22
- Installing the Software23
Connecting External Devices23
- Ports on the PC24
- Connecting External Devices to the Serial Port24
- Connecting External Devices to the Parallel Port25
- Connecting External Devices to the USB Ports25
Operation27
Switching on the PC27
Switching off the PC27
Indicators on the PC28
Keyboard29
- Important Keys and Key Combinations30
Working with Floppy Disks31
Settings in BIOS Setup32
Property and Data Protection32
- Unlocking and Locking Casing32
- Anti-Theft Protection and Lead-Sealing33
- BIOS Setup Security Functions33
- Access Authorisation Via Smartcard34
- Access Protection with Systemlock34
Troubleshooting and Tips35
Installing New Software35
Power-On Indicator Remains Unlit after You Have Switched on Your Device35
The Screen Stays Blank36
No Mouse Pointer Displayed on the Screen37
The Floppy Disk Cannot be Read or Written37
Time And/Or Date Is Not Correct38
Error Messages on the Screen38
Restoring the Hard Disk Contents38
Tips38
System Expansions39
Information about Boards39
Opening the Casing40
Closing the Casing41
Installing and Removing a Board42
- Removing Board Bracket42
- Installing Board Bracket42
- Installing a Board43
- Removing a Board45
Low-Profile Boards47
- Mounting Slot Adapter47
- Removing Slot Adapter47
Installing and Removing the Graphiks Card48
Installing and Removing Drives51
- Replacing Drive in 5 ¼ Inch Bay52
- Folding up and down the Drive Cage54
- Replacing the Floppy Disk Drive55
- Replacing a Hard Disk Drive57
- Replacing Second Hard Disk in 5 ¼ Inch Drive Carrier59
Installing and Removing a WLAN Module (Optional)61
Installing and Removing Smartcard Reader63
Extensions to the Mainboard67
- Upgrading Main Memory67
- Replacing the Processor67
- Replacing Lithium Battery69
Technical Data71
Index73

Fujitsu Siemens Computers SCENIC E - Operating Manual

Table of Contents

Related product manuals