Fujitsu Siemens Computers SCENIC E - Replacing a Hard Disk Drive

System expansions
A26361-K675-Z120-1-7619, edition 3 49
Replacing a hard disk drive
► Open the casing (see "Opening the casing" chapter).
► Fold up the drive cage (see "Folding up and down the drive cage" chapter).
Removing a hard disk drive
► Disconnect all cables connected to the drive (data cable, power supply cable).
► Press the EasyChange rails in the direction of the arrows (1).
► Pull the hard disk drive out of the carrier (2).
► Pull the EasyChange rails off the hard disk
drive.
i
It may be necessary to modify the entry for the drive in the BIOS Setup.