Fujitsu Siemens Computers SCENIC E User Manual

System expansions
54 A26361-K675-Z120-1-7619, edition 3
Removing WLAN module
1
► Open the casing (see "Opening the
casing" chapter).
► Disconnect the USB cable.
► Fold up the drive cage (see "Folding up
and down the drive cage" chapter).
► Remove the screw (1).
► Fold down the drive cage (see chapter
"Folding up and down the drive cage").
► Pull the WLAN module out of the
installation opening.
If you now want to install a disk drive, you must
first of all remove the cover from the upper
casing.
► Press the cover provided with the WLAN
module out of the casing from the inside.
► Install the floppy disk drive again (see
"Installing the floppy disk drive" chapter).
► Close the casing (see "Closing the casing" chapter).
!
If you then remove the WLAN module again without replacing it with a disk drive, you
must ensure the cover remains installed for reasons of cooling and fire protection and to
comply with the prevailing EMC (electromagnetic compatibility) regulations.
i
More detailed information on the use of Wireless LAN can be found in the "Wireless LAN"
manual. This manual is provided as PDF file on the "User Documentation" or
"Drivers & Utilities" CD.

Fujitsu Siemens Computers SCENIC E Specifications

General

Brand	Fujitsu Siemens Computers
Model	SCENIC E
Category	Desktop
Language	English