Fujitsu 5GRUDB3 - Page 3

2.9.2 Radio Performance p. 64
General Specications p. 65
Transmier Specication p. 66
Receiver Specication p. 74
2.9.3 Power Supply p. 78
Electrical Specications p. 79
DC Power Specication p. 79
3 Ordering Information p. 80
3.1 Radio Unit p. 81
3.2 Mounting Kits p. 82
3.3 Accessories p. 83
4 Installation p. 84
4.1 Unpack p. 85
4.2 Mounting p. 86
4.3 Installation Precautions p. 92
4.4 Returning of Defective Equipment p. 94
4.5 RU Installation p. 95
4.5.1 Installation Prerequisites p. 95
4.5.2 Aach L-Brackets and Eye Bolts p. 96
4.5.3 Aach RU Mounting Adapter Plate p. 97
4.5.4 Aach RU to Pole p. 99
4.5.5 Aach RU to Wall p. 105
4.6 Cable Installation p. 112
4.6.1 Connect Frame Ground Cable p. 112
4.6.2 Connect eCPRI Optical Cable p. 114
4.6.3 Connect AISG Cables p. 120
4.6.4 Connect RF Cables p. 121
4.6.5 Connect DC –48 V Power Cable p. 123
5 Power Up p. 126
5.1 Check Connections and DC Power Polarity p. 128
5.2 Apply Power to RU p. 129
5.3 Check LED Status p. 130
5.4 LED Display p. 131
5.5 Verify Alarm Status p. 133
5.6 RU Conrmation p. 134
6 Maintenance and Trouble Clearing p. 135
6.1 RU Alarms p. 136
6.2 Replace RU Mounted on Pole p. 140
6.3 Replace RU Mounted on Wall p. 144
3
Release 1.0 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only