Fujitsu 5GRUDB3 - Receiver Specification

Note: FCC Out-of-Block emission specication apply to the Δf
OBUE
( =10 MHz) range
Time Alignment Error
■ For Multiple-Input and Multiple-Output (MIMO) transmission, at each carrier frequency, TAE must not exceed
65 ns.
■ For intra-band contiguous carrier aggregation, with or without MIMO, Time Alignment Error (TAE) must not
exceed 260 ns.
■ For intra-band non-contiguous carrier aggregation, with or without MIMO, TAE must not exceed 3 μs.
■ For inter-band carrier aggregation, with or without MIMO, TAE must not exceed 3 μs.
Receiver Specication
Operating Band
n70 1695…1710 MHz
n66 1710…1780 MHz
VSWR
< 1.5 @antenna port
Reference Sensitivity (NF)
NF
REF
+ 2.5 dB
Dynamic Range (EVM)
Dynamic range (SCS=15 kHz)
EVM≤28.9%
Base Station
Channel Bandwidth
(MHz)
Subcarrier Spacing
(kHz)
Reference
Measurement
Channel
Wanted Signal
Mean Power (dBm)
Interfering Signal
Mean Power
(dBm)/BW
cong
Type of Interfering
Signal
5 15 G-FR1-A2-1 −70.7 −82.5 Additive White
Gaussian Noise
(AWGN)
10 15 G-FR1-A2-1 −70.7 −79.3 AWGN
15
1
15 G-FR1-A2-1 −70.7 −77.5 AWGN
RU Hardware Feature
Performance Requirement
74
Release 1.0 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only