Fujitsu 5GRUDB3 - Transmitter Specification

Channel Bandwidth [MHz]
Transmission Bandwidth Configuration N
RB
[RB]
Guard Band Can Be Asymmetric
Channel Edge
Channel Edge
Transmission
Bandwidth [RB]
Active Resource
Blocks
Resource Block
FNC001701_Rev_01
Figure 8
D
enition of Channel Bandwidth and Transmission Bandwidth Conguration for One NR Channel
Transmitter Specication
e RF performance requirements in this section are applicable only aer the RU DPD system has converged.
Operating Band
NR n70 617 MHz…652 MHz
NR n66 717 MHz…728 MHz
Frequency Error
Specication < ±0.05 ppm
Test Tolerance ±12 Hz
VSWR
< 1.5 @antenna port
RU Hardware Feature
Performance Requirement
66
Release 1.0 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only